Peer IP (Serial Link 1 Address)

(Radio Management Client - Data Profile View)

Radio Management allows you to view or define the Serial Link 1 Peer IP Address of all Conventional - Data Profile (record / rows) within this Data Profile View. This IP Address is assigned to the MC (Mobile Computer) end of the serial link1, and is also used to address the MC (Mobile Computer) via over-the-air packet data.

Because this feature is a non-template type value, from the main CPS interface, the Data Profile - (Serial Link 1 Address) Peer IP Address field is not editable when accessing the CPS in an Edit Template mode (see Manage Templates).

	Each "record / row" in this Data Profile View represents one CPS created Data Profile. Codeplugs can contain more than one Data Profile.
	See Also: Radio Management Column Data Options (Sorting, Hiding and Unhiding), and Grouping Radios

When the Data Profile Type field is set to "Conventional" or "Conventional & Broadband", and

when the Auto Generate IP Address field is "Disabled", and

( when the NAT Enable field is "Disabled", or

when the Packet Data Mode field is not set to "FNE" ), and

when the radio is model / option capable.

The Network ID octets of this IP Address must match the Network ID octets of the Subscriber IP Address field for the current Data Profile (record / row).

The Network ID portion of an IP Address is defined as Follows:

(When octet1 is between 0-127, the IP Address = Class A and the Network ID = the first 1 octet, or

When octet1 is between 128-191, the IP Address = Class B and the Network ID = the first 2 octets, or

When octet1 is between 192-223, the IP Address = Class C and the Network ID = the first 3 octets)

This IP Address:

Cannot be completely equal to the Subscriber IP Address (see above) for the current Data Profile (record / row), and

Cannot equal the Bluetooth DUN Subscriber IP for the current Data Profile (record / row) and

Cannot equal the Bluetooth DUN Peer IP for the current Data Profile (record / row) and

Cannot equal the Subscriber Air-Interface IP Address for the current Data Profile (record / row).

Octet Values also:

Must be between: [0-255], and

Cannot all be "0", and

Cannot all be 255

This IP Address's Default Value = 0.0.0.0 and therefore must be defined.

Go to the Data Profile View Page